Search

-En función del tamaño del horno, se pueden instalar uno o más cilindros de gas bajo cada rack. Estos cilindros se calibran de acuerdo con la fuerza que se desee producir y se sujetan al fondo, al bastidor del horno.

-Un sistema de pestillos de bloqueo mantiene los racks en posición baja. Sin ese bloqueo, cuando se extrajese un módulo de calentamiento, el rack tendería a subir por el empuje de los cilindros.

-Aplicable únicamente a Ecoven

• A cabinet for storing the SIDEL specific tools, to be mounted on the preform feeder gangways.
• Tools are sorted by items to be maintained: transfer arms, oven, PUPM, 40mm nozzle cylinders (upgraded snap ring free).
• 4 individual removable trays.
• Workshop trolley available upon request

• A vortex tube produces refrigerated air from high pressure air skid
• Low temperature air is blown on the neck finishes trough perforated tubes, with adjustable positioning against the water cooling shields, right below the oven modules

• On each heating module, a pair of individual lamp holders are inserted into the racks,.
• IR beam of the upper lamp, can be directed according to the most relevant angle
• This heating profile customization is fully reversible.
• Suitable for all types of oven

• An additional ventilation box to be installed opposite to the existing single ventilation box.
• Air is sucked from both sides of the oven.

-Reflector cerámico mantenido en su lugar arriba de la preforma por medio de un marco independiente, de altura ajustable.

-Parte de la irradiación, que normalmente se disipa, es redirigida mediante reflexión hacia la preforma

-Nuevo ajuste de soporte bloque/horno: configuración independiente del escudo de enfriamiento del cuello para una mejor estabilidad.

-Módulo Ecoven para el enfriamiento de las lámparas: la Super Cobra se remplaza por un ventilador específico para cada módulo.

-Módulos de calentamiento: solo 8 lámparas infrarrojas, lámparas más eficientes, pared de cerámica y reflector superior.

-Reflector superior del horno de cerámica, ajustable en altura para adaptarse a todas las longitudes de preforma. -

-Replacement of oven ventilation and preform elevator drive

-The drives used for oven ventilation and preform elevator  on your current Compact blower  (Siemens Micromaster or Danfoss VLT2800)  is not anymore available from the manufacturer..

-The replacement solution include

 -a software modification

 -a wiring modification

 -new drives

Replacement of oven motor

-The oven motor used on Compact blower is not available anymore from the manufacturer.

-Replacement solution include

New motor

New encoder

New mechanical support

New software update

Tunnel suited to your line, width, and speed (number of turbine)

Mechanical interfaces adapted to your machine

Electrical or gas energy

Options:

• multi-channel tunnel
• output motorized transfer belt
• system to empty machine with pneumatics in case of electricity shortage
• automatic belt cleaning brush (see O&U LSX007)
• eco belt (see O&U LSX018)
• gas oven (see O&U LSX024)

-Heating elements replaced by industrial Gas burners designed by Sidel.

-Optimum air/gas mixture for highest efficiency, with modulation on air and gas flows (more precise adjustment vs electrical solution, from 34 MBtu [10 KW] to 102 MBtu [30 KW]).

-Low emissions, NOx  and CO at all burner capacities.

        -Typical NOx emission:  approx. 15 mg/Nm3 at 17% in O2

        -Typical CO emission: approx.  80 mg/Nm3 at 17% in O2

-Infeed gas pressure : 140 mbar – 2 psi

-Outfeed burned gas by exhaust duct (possibility to recover this energy)

CE, FM, CSA, AGA, UL, burner assembly available on demand.

New system with (2x) Danfoss FC302 freq. converter for Wheel and Oven motion control:

• The new system consists of drives FC302 (regardless the original OEM configuration) with different power ratings and sizes, replacing the obsolete drives.
• It includes Hardware, Adaptation kit, Software preparation, Documents / BoM update.