Search

The Predis™ system is located in the oven entrance.

-First, the hydrogen peroxide (H2O2 employed as sterilized agent) is deposited onto the internal wall of each preform.

-Performs are then heated in the oven until they reach a temperature of up to 100°C which guarantees activation of the H2O2.

-In a constant controlled atmosphere, the system ensures reduction in microorganisms between the preform and the filled-capped bottle.

-根据烘炉的尺寸，可在每个烘炉架下安放一个或多个气体减振器。这些气缸安装在烘炉架底部，根据所产生的力进行校准

-锁销系统使烘炉架保持在下部位置。实际上，如果没有此锁销，抽出加热模块时，烘炉架通常会被气缸的推力顶起

-仅适用于ECOVEN烘炉

• A cabinet for storing the SIDEL specific tools, to be mounted on the preform feeder gangways.
• Tools are sorted by items to be maintained: transfer arms, oven, PUPM, 40mm nozzle cylinders (upgraded snap ring free).
• 4 individual removable trays.
• Workshop trolley available upon request

Replacement of old generation oven ventilation box by new generation (ventilation through reflectors) including electronic driven ventilator (adjustable speed).

Adaptation of ventilation system on necks at oven end, including additional ventilators.

Modifications in order to reduce lamp pitch from 19mm to 15 mm.

Adaptation of 2 additional heating zone ( 9 & 10) if not existing originally.

• A vortex tube produces refrigerated air from high pressure air skid
• Low temperature air is blown on the neck finishes trough perforated tubes, with adjustable positioning against the water cooling shields, right below the oven modules

The oven air cooling system components:

-an air/water thermic exchanger (radiator)  in front of the oven ventilation

-a 3 way valve allowing the water flow regulation through bypass (controlled by a temperature probe)

-the temperature is adjusted from the HMI

• On each heating module, a pair of individual lamp holders are inserted into the racks,.
• IR beam of the upper lamp, can be directed according to the most relevant angle
• This heating profile customization is fully reversible.
• Suitable for all types of oven

• An additional ventilation box to be installed opposite to the existing single ventilation box.
• Air is sucked from both sides of the oven.

-The dedust wheel comprises 30 injectors which blow compressed (at 2 bars) filtered air into the preforms

-Independently of the air supply for the machine air cylinders, the compressed air system provides a high level of filtration using a prefilter, a filter and an total filter. It also brings down air pressure from 7 bars to 2 bars

-The air suction hood comprises a turbine fan in a sealed housing, a particle filter and two baffles to channel air suction flow

-Drive for the rotation of the feed wheel, the dedust wheel and the transfer wheel is provided by a belt itself driven by the oven transmission shaft

The oven heat recovery system components:

-New air inlet module (1, 2)

-One bottom ventilation module including a fan (3, 4, 5)

-One top ventilation module (6,7)

New fixed spindle rotation chains no longer requiring periodical greasing.

Addition of bars in the modules of oven in which circulates of cooled water.

-A very simple replacement of the 2kW infra red lamps by the new 1,700W proximity reflector lamps

-On SBO Series 1  the ECO lamps can be installed without oven modifications whatever the oven pitch (15 mm, 19 mm, progressive)

-1,700W ECO lamps last at least 5,000 hours

-Ceramic reflector held in place above the preform by an independent, height-adjustable frame

-Part of the radiation, which normally dissipates, is redirected by reflection onto the preform

-Ceramic reflector held in place above the preform by an independent, height-adjustable frame

-Part of the radiation, which normally dissipates, is redirected by reflection onto the preform.