Air recovery for H.R. process [576]

-The amount of recovered air is linked to the type of blowers and depends also on the production conditions

        -Machine rate, number of blowing stations, preblow and blow pressure, bottle capacity

-The recovered air could be re-used to generate

        -Preblow air

        -Stretching and nozzle cylinders air

        -Low pressure air out of the machine (the blower acts as a LP compressor)

-The minimum required PCC version to install this O&U is V2.02; for prior versions, an update of the PCC is mandatory

Blowers S2 - PM, MM, GM, TM

-With the air recovery option, more than half of the used air is collected and converted into preblow, service air and used to generate air for the factory

-Another criteria to consider, is the Excellent integration into machine: The settings linked to the recovery option are recorded into the process recipes

-Reduced investments, thanks to smaller air compressors

-Recover up to 60% of the air consumed for the production of heat-set bottles

Yearly avoided Green House Gas emissions - Up to 166t CO2 (*)

(*) Result for an SBO10 producing 1l bottle

     a. 35 bar blowing pressure

     b. 15000 bottle/h speed rate

     c. 6000h production time / year