Air recovery kit, air recycling kit [543]

-SIDEL has developped a system to reduce the blow air and service air consumption on blowers.

-The amount of recovered air is linked to the type of blowers and depends also on the production conditions: machine rate, number of blowing stations, preblow and blow pressure and bottle capacity

-The recovered air could be re-used to generate:

- preblow air

- stretching and nozzle cylinders air

- low pressure air out of the machine (the blower acts as a LP compressor)

PCC Upgrade:  an upgrade of the PCC version to V2.02 - if the current PCC is ICC 7000 type - is no more mandatory. A software patch, integrated into the V1.10, V1.11, V1.12R1, V1.15R and V2.00R1, was built in order to keep the existing hardware*.*Some exceptions can subsist

All SBO S2

-Savings in 40b air of at least 15% and up to 40% depending on process parameters

-Savings in 7b air of 100% on 95% of the applications. Only 20 Nm3/h are necessary on start-up to prime system

-Constant bottle quality with no variation in process parameters

-Operating reliability. No maintenance necessary

-Reduced investment as compressors are sized to perfect fit