Search

-Set of LED lighting bars (6 to 11 units according to machine size)

-Fastening brackets included

-New 24V power supply with set of wires

• A vortex tube produces refrigerated air from high pressure air skid
• Low temperature air is blown on the neck finishes trough perforated tubes, with adjustable positioning against the water cooling shields, right below the oven modules

-Main technical evolution:

    •UPM

    •Console

    •Cams

-For output rate higher than 86 000 b/h EasyFEED is mandatory.

-A diagnostic visit has to be scheduled followed
by a refurbishing. This upgrade will be performed only if the machine has been refurbished  back to its original conditions

The oven air cooling system components:

-an air/water thermic exchanger (radiator)  in front of the oven ventilation

-a 3 way valve allowing the water flow regulation through bypass (controlled by a temperature probe)

-the temperature is adjusted from the HMI

-Linear motor replacing the cambox

-No oil lubrication

-Simpler than the current solution

-Disconnected from the machine drive chain

-No more need to move the oven to replace the component

According with SW version, the material can vary. As standard supply:

-MEMORY CARD B&R

-SAFE MEMORY 8MB B&R

-HARD DRIVE 128GB B&R

-The encoder is relocated from the central area of the blowing wheel, to the motoreductor driving shaft.

-Solution content:

a.New encoder with specific gear train and bracket

b.New electrical link on electrical rotary union

• Inspection  system developed by Sidel in order to grant preform and bottle quality, regardless the raw material used (rPet ready!)
• single camera and a single solid state illumination panel
• System is completely modular.
• Each module is a combination of one or more cameras and solid-state illumination panels
• Main units are
  • HMI – video processing unit
  • Cluster unit
  • Preform inspection
    • body
    • end/seal surface
    • colour
  • Bottle inspection
    • seal surface
    • body
    • base
    • neck/shoulder
  • Any combination of the above is possible

• Controlled bottle transfer with activated opening and closing movements of the gripper.

• The grippers do not rub around the bottle neck

• No restriction on machine's size
• This option may limit the maximum output rate of the machine
• Not compatible with oriented arms
•  Speed limitation:
  • Regular (Still and CSD) : 2,000 bph/mould
  • Hotfill : 1,800 bph/mould

Precise and efficient one-sided measurements using interferometric sensor technology, based on reflected infrared light

• Four measuring points to secure consistent bottle quality
• High-precision measurements +/- 2 µm
• Adjustable positions for measuring critical bottle points
• Combined with vision system to check the bottle base injection point

100% reliable and calibration-free, across a wide range of preforms - translucent, colored, rPET or virgin

• Available for cylindrical, translucent and opaque bottles without TiO2

• Inserito sulla rotaia di alimentazione, questo dispositivo annulla la carica elettrostatica delle particelle e le rimuove aspirandole
• Un generatore di alta tensione alimenta tre barre antistatiche
• Sulla sommità e su entrambi i lati della fila di preforme viene soffiata aria filtrata e ionizzata
• Un sistema di aspirazione continua genera una depressione nella centralina di ionizzazione
• L’aria espulsa dal sistema di aspirazione viene accuratamente filtrata per evitare la dispersione delle particelle nell’atmosfera

• During cam replacement, a magnet will hold the nozzles in the upper position, keeping the rollers away from the surface of the cam

• Depending on machine configuration, the proposed kit to migrate to positive preform unloading can include :
  • Loading cam
  • Customized 2 step unloading cam
  • Possibly redesigned grippers

New design to improve the air tightness in the sleeves.

New assembly principle

• On each heating module, a pair of individual lamp holders are inserted into the racks,.
• IR beam of the upper lamp, can be directed according to the most relevant angle
• This heating profile customization is fully reversible.
• Suitable for all types of oven

• An additional ventilation box to be installed opposite to the existing single ventilation box.
• Air is sucked from both sides of the oven.