Search

- Il contenuto del kit è adatto ad ogni macchina, con una modifica diversa a seconda del tipo di macchina (PM/MM/GM).

- Si deve prevedere una visita diagnostica, seguita da un ripristino. Questo upgrade viene effettuato esclusivamente se la macchina viene riportata nel suo stato iniziale.

In the event of an equipment failure, there are two options for maintenance of production:

-Either deactivation of the non-functional box with a corresponding adjustment of the heating profile to offset the loss of heating capacity.

-Or replacement of the box with an equivalent: an Olicorps box can thus be replaced with a Siemens box without the need for any change in automated procedures.

Comment: box selection is possible only if the box is activated and if no lamp is being used on the oven concerned.

- L’unità portastampo cilindrica delle macchine Series 2 e Universal comprende un carter che protegge gli operatori al momento della chiusura del bloccaggio. - A fine vita, questo carter di protezione potrebbe rompersi all’altezza dell’unico punto di fissaggio, situato sull’ammortizzatore dell’unità portastampo.- Questo upgrade, pertanto, ha lo scopo di aumentare la robustezza del carter e, indirettamente, di migliorare il livello di sicurezza.

-Depending on the size of the oven, one or more gaz shock can be placed under each rack. These cylinders are calibrated according to the force to be produced, they are attached at the bottom,  to the oven frame.

-A locking latch system keeps the racks in the down position. Indeed, without this lock, whenever a heating module is extracted, the rack would tend to rise under the thrust of the cylinders.

-Applicable only on ECOVEN

-Scope of supply: LOTO and CIL stickers, CIL maps and OPL plastic coated sheets

-CIL (Cleaning, Inspection, Lubrication) stickers and Standard operating procedures integrated in the maintenance documentation

-LOTO (“Lockout Tag out”) on critical points of the machine. Ensures that dangerous machines are properly shut off and not started up again prior to the completion of maintenance or servicing work

-OPL* (One Page Lesson): simple operational tool used to educate operators in an organization and improve product or service quality

    (*) Not available on Universal blowers

-L'aria fredda fuoriesce da uno spruzzatore e attraversa un tubo ricurvo.

-Il tubo, caratterizzato da fori su tutta la sua lunghezza, segue il percorso delle bottiglie nell'area di trasferimento.

-Questo sistema di raffreddamento utilizza una miscela di acqua e aria nebulizzata che viene proiettata sulla base della bottiglia.

Molle di richiamo ad anello, identiche a quelle adoperate sulle soffiatrici Matrix.

-Nuovo design delle guide sotto collarino

-Guide superiori piane rinforzate

-Guide del corpo delle preforme antistatiche (in sostituzione delle guide cilindriche in acciaio inossidabile)

-Guide corpo a cambio rapido (in opzione)

-The content of the kit is adapted to each machine with specific modification per machine type (PM/MM/GM)

-A diagnostic visit has to be scheduled followed by a refurbishing. This upgrade will be performed only if the machine ha been refurbished  back to its original conditions

-Sorting of the preforms made by a rotating table

-Transfer by the neck flange all along the path

-Preform conveyed by the body with 2 moving brush belts

-Dedicated Easy Feed pages integrated in the Matrix blower HMI, with the same ergonomics

-Production setting included in the process recipe

-New design of the shell holders assembly

-Flat seals are replacing the current o-rings

The option consists of a set of high efficiency eliminates the microorganisms. filters that prevent the passage of odors and dust in the air blowing

-A charcoal filter "AK" eliminates odors and possible hydrocarbon vapors.

-A bacteriological filter "SRF" eliminates the microorganisms.

-Alcohol treatment of preforms/bottles grippers, exit star wheel, blowing bell and top of mold.

-UV treatment of spindles

-Full automatic cycle launched automatically after operator intervention

-Cycle time currently lasting approx. 25min

• Dead space is the volume of air that is consumed that does not take part of the bottle forming. It fills only the internal chamber of the nozzle cylinder and its size depends on the geometry of the parts.
• Less blowing air consumption because internal dead space of the nozzle cylinder, is reduced by half.
• Applicability:
  • 40 mm diameter nozzle cylinder on Universal
  • 40 mm diameter on upgraded Series 2 with Universal blowing blocks. (Ref #970)

•Replacement of the standard rail by a rail UV

•This option can have an impact on machine footprint.

•The final design of the solution is linked to the customer layout validation

The module eliminates by filtered air flow the solid particles which may accumulate inside the preforms

• New chutes
• New baskets
• Preform and bottle hatch
• Collector

• A cabinet for storing the SIDEL specific tools, to be mounted on the preform feeder gangways.
• Tools are sorted by items to be maintained: transfer arms, oven, PUPM, 40mm nozzle cylinders (upgraded snap ring free).
• 4 individual removable trays.
• Workshop trolley available upon request