Search

Search results
121 - 140 / 451

565 - Preform desnesting system 见 O 和 U 板料
描述

Air ejection system to be installed right after the unscrambler rollers.

Photocells will detect any nested preforms and air will be blown to eject it.

好处

Remove any nested preform, avoid preform jam at preform infeed rail.

关键信息
Improve blower efficiency
适用机型范围

Blowers Series2

567 - Stand alone preform elevator 见 O 和 U 板料
描述

This is the replacement of the actual preform elevator by a new one of last generation. His functionment is totally independent of the blower.

好处

-New preform flow loop control management.

-Limits preforms chocks and marks.

-New nested preform ejection.

-Easy maintenance (maintenance-free components) and accessibility (new housing). His average efficiency is about 98%.

关键信息
Improve blower efficiency
适用机型范围

Blowers Series2

571 - PCC版本V2.02 见 O 和 U 板料
描述

•增加了对软盘导出/导入警报保留列表的新功能

•更新SFB和SFS灌装机的警报清单

•添加新的重要级别、警告级别和告知级别的警报

•添加了待机速度设定点

•提供更佳的可视导航界面

好处

获取最新的2.02版本应用程序，从诸多优势和新功能中获益

关键信息
Series 2吹瓶机的新功能
适用机型范围

All Series 2 operating with an earlier PCC application version. In some cases, the replacement of the PCC could be needed.

574 - Filtration on Air Recovery 见 O 和 U 板料
描述

On machines equiped with an Air Recovery Kit, filters units keep preblow, nozzle cylinder and stretching cylinders circuits, free of any PET dust that could be sucked by the nozzle during recovery phase.

好处

-Secure revered air quality

关键信息
Avoid pneumatics circuits contamination by PET dust
适用机型范围

Series 2 equiped with Air Revovery Kit

576 - 热灌装空气回收 见 O 和 U 板料
描述

在每个吹瓶单元安装一个回收阀，在冷却阶段回收阀将由PLC激活添加了专用的低压面板。

好处

-采用空气回收选件，可回收半数以上的生产用气并将其转化为预吹瓶和生产气体，另外，还可用于生成工厂用气

-另一重要优势在于，该选件可与机器完美集成：与空气回收选件相关的设置可记录在工艺配方中

-减少投资（仅需要较小型的空气压缩机）

-可回收高达60%的生产用气（生产热定型包装瓶）

关键信息
回收多达60%的热灌装空气
适用机型范围

PM, MM, GM, TM

580 - 二代吹瓶机上安装优塑型吹嘴适配器 见 O 和 U 板料
描述

-通过将Universal™技术与Series2的吹嘴相结合，可确保喷嘴子组件的使用寿命从现在的1000万个循环增加至2000万个循环。

-该技术已从Universal™吹瓶机移植到 Series 2吹瓶机

好处

-使吹嘴的使用寿命延长100%

-采用该接头前：1000万个循环；采用该接头后：2000万个循环

-提高生产能力

-减少维护时间及成本

-符合统一设计原则的工业化解决方案，完美集成接头

关键信息
使吹嘴的使用寿命延长100%
适用机型范围

二代吹瓶机全部。对于带有吹嘴安全凸轮的机器，需要进行调查。

898 - Pneumatical nozzle 见 O 和 U 板料
描述

We propose the replacement of the nozzle cam driven, by pneumatic actuators, based on Series2 technology.

The expected customer benefits should result in a protection of the neck finish during blowing process.

好处

-Allows to blow lighter preforms

-Reduces blowing air leaks

-Nozzle cylinders are easy to service, a specific seal kit does exist

关键信息
Avoid light weighted neck finish deformation during blowing.
适用机型范围

SBO 10 Series 1, SBO 16 Series 1

899 - 翻转阻隔器 见 O 和 U 板料
描述

-最大程度缩短生产换型时间：预吹瓶和吹瓶采用同样的空气接口，整个阀组在西得乐工厂组装（减少停机时间），无需调整电气图或PLC软件。

-适用机型：中间/下位排气、有/无空气回收套件均可

好处

-更具可持续性：不漏气，减少了静容量（预吹瓶和吹瓶）

-减低维护成本：易损件价格更低廉（每年节省高达1380欧元），吹瓶循环次数增加（理论上，相对此前的吹瓶机可提升高达100%）

-成熟技术：在Universal吹瓶机基础上升级，目前用于Universal吹瓶机

关键信息
减少耗气量、维护成本，提高生产可靠性
适用机型范围

一代吹瓶机：SBO 10、SBO 16

903 - Series 1吹瓶机上采用ECO生态灯 见 O 和 U 板料
描述

-具体更换过程非常简单，只需将2千瓦的红外线灯管更换为新式1700瓦近反射灯即可

-在SBO Series 1吹瓶机上，无论烘炉间距是多少 （15mm、19mm还是渐进式），烘炉不需要经过改良就可以安装ECO生态灯

-1700瓦ECO生态灯至少可使用5000小时

好处

-加热过程中的耗电量至少可降低15%

-烘炉节约的电能至少为15%

-提高了辐射强度

-便于安装

在Series 1或Series 2吹瓶机上结合使用ECO生态灯与炉顶反光板，可节能30%

关键信息
耗电量至少降低15%
适用机型范围

Series 1吹瓶机 （不包

912 - Transfer arm with linear guide 见 O 和 U 板料
描述

The roller guided transfer arm replaces the S1 self lub bushing guided arm.

-includes S2 quick change head, grippers and setting jig.

-available as well with S1 quick change head.

好处

-The latest technology made available on S1

-High positioning  accuracy:

     -vibrations and bending at the end of the gripper are reduced.

     -springs repositioned for operation within their working range

     -no risk of adjustment errors.

-Easy to maintain, longer service life, cleaner

     -lubrication of the guide to be undertaken every 6 years for a rate of 1200 b / h / m.

     -reduction in maintenance costs and time

     -environment of the transfer function made cleaner

-A lighter arm increases as well the life of cams and rollers:

     -aluminium guide rail

     -optimized support

     -total weight reduced by about 1.2kg

关键信息
Increase your equipment efficiency
适用机型范围

Series 1 blowers SBO 4 -  SBO 6 - SBO 10 - SBO 16 - SBO 24/26

913 - 电耗测量 见 O 和 U 板料
描述

- 在HMI主页上显示电耗

- 需要安装新版PLC/HMI软件

好处

- 可评估吹瓶工艺配方对电耗的影响

- 可监测瞬时电耗和平均电耗

关键信息
优化您的生产能耗
951 - Speep Up kit 1600 bphpm 见 O 和 U 板料
描述

-Like for the 1530 bphpm speed up kit, the announced rate is a maximum mechanical rate valid only for standard processes (neither HR, neither Refill, nor PH) and fitted with cylindrical GUPM.

-A diagnostic visit has to be forecasted followed by a refurbishing. This upgrade will be performed only if the machines is back to its original conditions.

-Additional 1530 bhm kit for machine number lower than SBO PM 5227, SBO MM  5240, SBO GM  5259.

好处

Increase your production capacity through a limited investment.

关键信息
Produce more with your current equipment
适用机型范围

Bottle drawing & mold weight/drawing necessary, otherwise garantee on mechnical, not on process.PM<5500MM<5500GM<5700Can not be fitted on machines with square GUPM

957 - 在Series 2吹瓶机上采用Universal空气旋转接头 见 O 和 U 板料
描述

供应范围：

- 40b/7b旋转分配器；

- 电气收集器；

- 编码器轮；

- 空气分配器（MM GM）

好处

-延长使用寿命：至少增加7,000小时

-快速现场安装：一名西得乐技师仅需3天即可完成

-快速便捷维护40巴空气回路（必要时，密封套件30分钟即可安装完毕）

-Universal技术现在可用于Series 2吹瓶机

关键信息
提高空气旋转接头使用寿命
适用机型范围

二代机吹瓶机 PM MM GM

960 - Kohlox™技术与新型DLC镀层锁销相结合 见 O 和 U 板料
描述

西得乐开发了独到的Kohlox™模具免润滑复合材料技术

-简化模具维护过程，缩短模具维护时间

-使模具保持清洁，进而也使所吹制的包装瓶保持清洁

-模座更轻，有利于延长凸轮使用寿命

-由于磨损减少，延长了模具的使用寿命

好处

-新型类金刚石碳涂层（DLC）模具锁销，可延长模架使用寿命，缩短维护时间 每周润滑次数从2次减少至1次

-每月可增加四十分钟的生产时间

-相互作用的部件采用了低摩擦系数材料，从而降低了部件维修频度

关键信息
减少维护时间，提高模架的卫生性
适用机型范围

带气缸GUPM的S2二代机

961 - Compensation pads 见 O 和 U 板料
描述

Polyurethane pads advantageously replace the spring washers.

Fits only on square forged GUPM equiped with a compensation chamber (most of the Series1, and a few Series2)

好处

Greater reliability

Easier adjustments

Avoid the tedious counting and stacking of the spring washers, when doing a refurbishment

关键信息
Square GUPM reliability improvement
适用机型范围

SBO 1 - SBO 1 Lab - SBO 2/3 - SBO 2F - SBO 4/4 - SBO 4/6 - SBO 6/6 - SBO 6/10 - SBO 10/10 - SBO 10/14 - SBO 16 - SBO 24/26

962 - Eco lamps for Series2, Eco solutions for oven 见 O 和 U 板料
描述

-A very simple replacement of the 2kW infra red lamps by the new 1,700W proximity reflector lamps

-On SBO Series 1  the ECO lamps can be installed without oven modifications whatever the oven pitch (15 mm, 19 mm, progressive)

-1,700W ECO lamps last at least 5,000 hours

好处

-At least 15% energy consumption saved with the new eco-lamps on Series 2

-Better zoning and improved neck protection

-Improved process stability

-Quartz tube is mechanically protected

-Processing capabilities remain universal

Combine the ECO lamps with the oven top reflector on Series 1 or Series 2 blowers and get 30% power savings

关键信息
Reduce your electricity consumption by at least 15%.
适用机型范围

Series 2 blowers except heat-set version

965 - 1800 bphpm增速套件 见 O 和 U 板料
描述

-名义生产速度是只有在标准工艺（非HR、Refill、PH）中才能实现的最大机械生产速度，另外设备上还要装有圆柱形GUPM模具。

-升级改造之前必须安排现场诊断评估。该升级只有在机器恢复到原始状态后才可以进行。

-要安装此O&U（选项与升级），PCC版本不能低于V2.02。如低于此版本，必须升级PCC才能安装。

好处

-由于采用了基于Universal技术的新加速套件，SBO2/2+吹瓶机生产速度可达1800 b/h/m

-生产速度不超过1400、1530或1600 b/h/m 的吹瓶机，可进行升级来提高生产速度（不同设备的升级套件构成也会有所差别）

关键信息
吹瓶速度达到1800瓶/小时/模具（b/h/m）
适用机型范围

PM MM GM

966s1 - Oven Top Reflector "dummy lamp" on S1 见 O 和 U 板料
描述

-Ceramic reflector held in place above the preform by an independent, height-adjustable frame

-Part of the radiation, which normally dissipates, is redirected by reflection onto the preform

好处

Heating electricity consumption can be reduced up to 15%

Combine the ECO lamps with the oven top reflector on Series 1 and get 30% power savings

关键信息
Reduce your electricity consumption up to 15%
适用机型范围

Series 1 blowers: SBO 4, 6, 10, 16 and 24/26

966s2 - Oven Top Reflector "dummy lamp" on S2 见 O 和 U 板料
描述

-Ceramic reflector held in place above the preform by an independent, height-adjustable frame

-Part of the radiation, which normally dissipates, is redirected by reflection onto the preform.

好处

Heating electricity consumption can be reduced up to 15%

Combine the ECO lamps with the oven top reflector on Series 2 and get 30% power savings

关键信息
Reduce your electricity consumption up to 15%
适用机型范围

Series2 MM & GM. Not available for PMCould be implemented with Eco lamps (O&U 962) for more savings.

966U - Universal炉顶反光板 见 O 和 U 板料
描述

-陶瓷反光板通过高度可调的独立支架固定在瓶胚上方相应位置

-正常情况下损失的部分辐射热量，将由反光板反射回到瓶胚上

好处

加热电能消耗至少 可降低15%

关键信息
耗电量至少降低15%
适用机型范围

优塑吹瓶机