Search

Safety radar sensor SRE200 is an active protection radar system that monitors the dangerous area of a machinery with the goal to detect human beings. The sensors are FMCW radars (Frequency Modulated Continuous Wave) based on a detection algorithm that is used to detect movements and micro-movements, ignoring static objects. High availability are ensured even where there are external influences such as dust, dirt, rain, light, sparks or vibrations.

The new additional module saves time by automating and parallelizing the pad placement, thereby enhancing the overall efficiency of the palletization process.

The additional pad placing module places the pad on the empty pallet, while the main pad placer only needs to place the pads between the layers. In this way, the palletization process is not interrupted to allow the main pad placer to also place the pad on the empty pallet.

-这种柱完全用不锈钢制成，固定在灌装机的机座上，通过紧固在滑动环中的板和气动活塞与旋盖机的机身相连接。

-该抗振柱可降低旋盖机的振动，从而提高旋盖工艺的质量。

-New pressurization valves replace existing, internal spring type.

-Designed to run with or without tank pressure, and to perform hot production processes.

-Rounded pushing device profile improves functionality in closing the CO2 channel and reduces stem seal wear.

-New pressurization valves replace existing, internal spring type.

-Designed to run with or without tank pressure, and to perform hot production processes.

-Rounded pushing device profile improves functionality in closing the CO2 channel and reduces stem seal wear.

-New pressurization valves replace existing flat O-ring sealed type.

-More easily sanitized with internal component made entirely from polyurethane 95 shore.

-Internal polyurethane component optimizes seal on the stem, extending the maintenance interval.

-Internal component with 7mm air return for fillers processing bottles of 1 liter or more. 5% over speeds obtained with HF valves. -Internal configuration with increased air return and elimination of valve siphoning.

Parts affected:

- Internal component 

- Pressurization valve 

- Valve support

-New 12 track collector and S7 PLC

-All system components in stainless steel.

-The central collector is a more easily sanitized solution with polyurethane seals for a longer lasting span life

-Pressure control of ± 0.1 bar and to 3 mm for the level

-The product condensed during the decompression phase is recovered in a central collector supplied with the system and then recycled into the first container S3

-Operation may also be performed using the self-priming pump

-The liquid is always in contact with CO2 and therefore does not get contaminated

System consists of an aspirator and a deioniser, this easiate the elimination of colored lacquer particles from the caps.

System can be applied anywhere on the 2000 ultraclean channel. One aspiration point in the hopper and one in the cap slide channel.

The separator for the vacuum pump saves the dispersed product during the atomization phase, destroying it and bringing it back to its original status.

The separation also helps to reduce water consumption during pump operation. Pump efficiency also benefits from this application.

The upgrade includes:

A – Charged carbon fiber bearing less PEEK roller

B – Level cam (finish thickness 0.2 microns)

C – Acting cylinder insertion cam (finish thickness 0.2 microns)

D – New oil-free cylinder

E – Automatic, continuous water / soap lubrication box