Search

The upgrade includes the supply of a bearing-free roller made from carbon fiber-reinforced PEEK and, possibly, level and actuator introduction cams.

The previous buttons and shoes have been replaced by

    -New-generation CO2 flux and decompression buttons (with external spring)

    -Dedicated flux shoe

    -Dedicated decompression shoe

    -Dedicated sanitation shoe

-New actuator rod guide

-New HNBR seals

-New stainless-steel Seeger rings

-New bearing-free roller

-Lubrication regulation by replacing oil with water.

System Expansion:

-Replacement/expansion of operative surface (HMI).

-Increase in the number of I/O’s.

-Update and upgrade of the communication network.

-Integration of field apparatuses such as drives and inverters.

组件构成：

a)灌装机进瓶导轨

b)瓶颈组块

c)瓶身组块

d)瓶身组块 - 高250 mm

e)空气进瓶通道

f)通风单元

-Dual pre-evacuation and bottle flushing system

-An initial pre-evacuation phase followed by a flushing phase. Followed by another pre-evacuation phase.

-The oxygen in the bottle is used up. Then the bottle is pressurised and filled.

-Sidel's Sonic De-Foaming System is an alternative way of dispersing foam. It is economical and does not harm the environment. It employs high power ultrasound (HPU) technology

-The bubbles of foam are attracted and then destroyed  under the action of the compressive forces generated by the sound wave

-The new O/C mechanism, with a stainless steel inner part and plastic bushing, allows optimization of the filling valve functionality

-New materials used for the seal kit and bushing

The current solution with a fixed inlet/outlet transfer bottle guide increases risks of loosing bottles in critical areas.

-目前的解决方案没有扭矩限制器，可能因过载导致高昂的维修成本和停机风险。 

-新解决方案措施：采用扭矩限制器和较长轴的全新控制元件

New waterproof materials used for the seals enable product change without contamination risk

-For a can neck changeover, the parts to be substituted are: the valve bell and the dummy bottle seals.

-A size changeover (with a change in the can body diameter) involves a quick change of the centring unit with a corresponding reduction and substitution of the ejectors, the drive starwheel and the wormscrew.

-For a change in can height it is necessary to substitute the filler spacers so that they match the can dimensions. For cans with a height of more than 115 mm it will also be necessary to insert a third starwheel element

-the skid allows to totally recover the water used for washing the caps

-the wash water is recovered in tanks and sent to the skid

-the skid retrieves chlorinated water, the water is filtered, sent into the recirculation loop and in chlorinated again to reach the required percentage

-软件读取在过去的解决方案中的速度和位置

-采用Phoenix系统的新解决方案可提供更高的安全性，由编码器读取速度和位置，再由机械硬件无差错地传输信号（例如停机时开门）

-The current solution results in a complete dismantling of the fork to enable changeovers

-The new solution allows neck changeover by changing the neck support of the fork without removing the support

-The UPS (Uninterruptible Power System) isolates the load from the AC mains supply, protecting it from voltage drops, spikes, transients, RFI and frequency variations. In the event of total or partial AC mains power failure, the UPS will continue, without interruption, to provide power to the load from the sealed battery.

-Equipment authonomy depend on battery capacity and output load

-When the AC mains supply is restored, the UPS automatically recharges the batteries, ready for any power failure emergency.

-New design of the lower manifold with new gaskets and sliding rings

-the sliding seal has been replaced by a dedicated labyrinth.

-To reduce the top load working on the manifold rotary union (RU), an additional supporting unit has been introduced to unload the weight of the full piping

-当前系统中，有些设备的同步系统采用独立于变频器的CleverAx卡；有些设备采用的是老式Danfoss（丹佛斯）变频器，内置SyncPos卡。

-新系统采用内置新MCO305 卡的全新Danfoss FC302 变频器